Product Description |
Price
|
Hi Torque budget gear reduction mini starters-recommended for use with our engine swaps & headers. saves weight,additional cranking power and additional header clearance & accessability! starters are available for 5.0/302/351W/351C with auto or manual trans. available for 429/460 engines with 164 tooth flexplate with auto trans
|
$119.95
|
Steering shaft kit. low profile design steering shaft to give maximum header clearance. We recommend these for any application that uses large tube headers. For some large tube applications they are mandatory to minimize fitment issues! Fox body
|
$259.95
|
5.0/302 custom competition oil pan 7qt with crank scraper, dual drain plugs & special 3/4" pickup
|
$364.90
|
Fuel tank pickup insert-converts stock EFI type fuel tank to carb type pickup for carbureted fuel system use.
|
$169.95
|
351W street/strip Fox swap oil pan-5qt with pickup & dipstick
|
$179.95
|
351W custom competition oil pan 7qt with crank scraper, dual drain plugs & special 3/4" pickup
|
$437.00
|
351W custom Pro power pan with baffles, recovery pouch & windage tray, etc.
|
$474.95
|
351C custom competition oil pan 7qt with crank scraper, dual drain plug & special 3/4" pickup
|
$440.00
|
460 street/strip oil pan, 6qts, includes pickup & dipstick assembly & main cap stud
|
$269.95
|
460 custom competition oil pan (with new upgrades!) , 7qt with crank scraper,full rear/main sump slosh bafle, dual drain plugs & special 3/4" pickup
|
$437.00
|
460 custom Pro pan with baffles recovery pouch & windage tray, etc.
|
$479.95
|
Windage tray with hardware avail. for 302/351W/351C/429/460
|
$119.95
|
Dipstick assemblies for above oil pans. Dipsticks go directly into oil pan.
|
$22.95
|
Oil pump for above oil pans-standard volume
For 5.0/302/351W/351C/429/460
|
$54.95
|
Oil pump for above oil pans-hi volume
For 5.0/302/351W/351C/429/460
|
$59.95 - $89.95
|
79-04 Mustang Tubular Mild Steel K Member-UPR
» Does NOT Alter Wheelbase
» Black Powder Coated Finish
» Seamless Mild Steel Tubing
» Thicker 1/4" Motor Mount Pads
» Tig Welded in Billet Fixtures
» Saves 33lbs over the factory K-member
» All Welding & Materials Made in the USA!
» Can be used with UPR Non-Adjustable, Adjustable A Arms or Factory A Arms
|
$299.95 |
79-04 Mustang Tubular Chrome Moly Steel K Member-UPR
» Does NOT Alter Wheelbase
» Silver Powder Coated Finish
» Thicker 1/4" Motor Mount Pads
» Tig Welded in Billet Fixtures
» 4130 Seamless Chrome Moly Tubing
» Lighter and Stronger than Mild Steel
» Saves 37lbs over the factory K-member
» All Welding & Materials Made in the USA!
» Now includes Rack Bolts & Offset or Standard Rack Bushings
» Can be used with UPR Non-Adjustable, Adjustable A Arms or Factory A Arms
|
$399.95 |
79-04 Ford Mustang 3/8" K-Member Spacer Drop Kit | UPR-Looking for a way to keep from having to replace or cut your stock hood but need the extra clearance then look no further than UPR Products 3/8" K-member Spacer Kit. Designed for use with the UPR Tubular K-member but will also work with other K-members as well. This kit includes 8 laser cut plates to match the foot print of the UPR K-member. Also includes all Grade 10.9 hardware that is longer than stock so it can accommodate the thicker plates.
|
$99.95 |
** UPR Anti Roll Bar kits-The UPR Pro-Series ™Anti-Roll Bar Kit Weld to Fit is part of the Pro-Series ™ Suspension line used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features roller bearings and solid 1 1/4" bar to ensure the smoothest reacting kit available!
Bar assembly comes partially finished so that it can be installed around tailpipes. Finish welded is required. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.
|
$239.95-$399.95 |
Mustang Rear Air Bag Kit 40947 |- Keep your 79-04 Mustang squarely planted with this adjustable rear airbag . Axle torque can create body roll and this airbag placed inside the passenger side spring can limit that roll and keep the car straight. |
$35.99 |
79-04 Ford Mustang Heavy Duty Upper & Lower Torque Box Kit-UPR Products Upper & Lower Torque Box and Floor Pan re-enforcement kit will make your 79-04 Mustang Rear Suspension Bullet Proof. Giving your Mustangs Suspension the Strength and Consistency you need to Run with the Best.
Whether you’re running 7 second ET’s in the ¼ mile, road racing, or just driving It like you stole it. UPR’s Upper & Lower Torque Box and Floor pan Upgrade Package will Eliminate or Repair any Torque Box Problems.
Exclusive Process and Material: Made from 11 Gauge Grade 50 High Strength Marine Steel, Laser Cut for Precision Fit and Finish. Upper Kit Includes: 2pc. Upper re-enforcement Plates, 2pc. Upper re-enforcement Boxes, 24pc. Upper Hardware Kit (Grade 8). Lower Kit Includes: 2pc. Lower re-enforcement Plates, 2pc. Lower re-enforcement Boxes, 24pc. Lower Hardware Kit (Grade 8). |
$79.95 |
Front motor plates 6061 T6 aluminum for 5.0/302/351W/351C/460. available in standard rectangular shaped or V shape trimmed at "NO EXTRA CHARGE" . also available in our Stage 1,2 & 3 motorplate mounting kits. Limited availability!
|
$159.95
|
Front motor plate mounting brackets-this is a weight & torque distributing bracket.It is designed to provide a simple, effective and professional means to install motor plates even with the thin metal of the fox body frames that make it difficult to just weld a conventional tab to.. Bolt in & weld! Includes grade 8 hardware! Limited availability!
|
$169.95
|
Mid motor plates-mild steel-available for 5.0/302/351W/351C/429/460 Limited availability!
|
$99.95
|
Mid motor plate mounting brackets attaches plate to frame, includes hardware Limited availability!
|
$59.95
|
Lateral limiter kit--eliminates forward/backward engine movement when using a motor plate--includes 2 limiters with spherical ends (heim joints)
|
$149.95
|
STAGE #1 motor plate mounting kit--includes front plate & mid plate . available for 5.0/302/351W/351C/429/460 . includes installation instructions & e mailed photos! Limited availability!
|
$229.95
|
STAGE #2 motor plate mounting kit--includes front plate, mid plate & dual lateral limiter kit, available for 5.0/302/351W/351C/429/460 . includes installation instructions & e mailed photos! Limited availability!
|
$379.95
|
STAGE #3 Complete motor plate mounting kit--includes front plate & D&D mounting brackets with hardware, mid plate & brackets & dual lateral limiter kit. available for 5.0/302/351W/351C/429/460
includes installation instructions & e mailed photos! Limited availability!
|
$479.95
|
Crank pulley spacer- ¼” 6061 T6 aluminum to match with our motorplate kits. Simplifies lining up pulleys & other accessories when using front motorplates. available for "most" Ford engine series combination including 351C's & 429/460's
|
$34.95
|
Motor mounts for 429/460 in Fox body Mustangs & vehicles-bolt-in recommended for cars with approx. 400-500hp
|
$199.95
|
Motor mounts-"Solid" 429/460 Ford. these mounts will provide correct and positive location of the engine for D&D headers as well as most other headers- NOTE-we only recommend using solid motor mounts with aftermarket blocks or production blocks that have been upgraded to threaded freezeout/core plugs! |
$199.95 |
Threaded freeze/core plug kit-adds strength to a production block and eliminates the danger of blowing out press in plugs- 1 1/4" NPT-requires tapping the block for the plugs. fits most small blocks & 429/460 . |
$29.95 |
Motor mount kit for 351C in Fox body Mustangs & vehicles-heavy duty rubber mounts with steel interlocking device to limit movement & prevent breakage. bolt-in
|
$119.95
|
Motor mount kit for 351W--heavy duty rubber type with interlocking device to limit movement & prevent breakage. bolt-in
|
$109.95
|
Motor mounts-"Solid" small block Ford-available for 5.0/302/351W/351C. these mounts will provide correct and positive location of the engine for D&D headers as well as most other headers- NOTE-we only recommend using solid motor mounts with aftermarket blocks or production blocks that have been upgraded to threaded freezeout/core plugs! (pair) |
$99.95 |
Mustang-Fox body front coil springs-NEW-please contact us for details & specifics -as low as
|
$129.95
|
Transmission crossmember--adjustable-fits T5,C4,C6 and some Powerglide applications
|
Contact us!
|
Fox Body & SN95 driveshaft safety loops-available for 1979-2004 Mustangs
|
$34.95
|
Roll bar--8 point-NHRA/IHRA approved--.134" tubing--Must be shipped by truck freight. Custom fit! Bar is designed for the specific make & model of car. Not a “one size fits all bar“ like many others!
|
$269.95
|
Roll cage--10 point-NHRA/IHRA approved--.134" tubing. Must be shipped by truck freight. Custom fit! Cage is designed for the specific make & model of car. Not a “one size fits all” cage like many others!
|
$369.95
|
Subframe connectors--bolt-in & weld-rectangular tube type
|
$169.95
|
Subframe connectors--weld-in type with seat crossover brace
|
$99.95
|
Hi Flow aluminum radiator--great for big cubic inch swaps! available in 19"x26",19"x28",19"x31"
|
$239.95
|
79-93 Ford Mustang Radiator Air Deflector | -Don't overlook a key part of your 79-93 Mustang's Cooling System! The factory air dam/air deflector directs air to your radiator and without it your car loses some of it's effectiveness. This Aluminum replacement Radiator Air Deflector that will hold up at speed better than the stock plastic piece that can flex. Attaches to the factory radiator support, no drilling required. |
$39.95 |
Hi flow-hi cool mechanical aluminum water pump -increased cooling/reduced temps for your 429/460
|
$179.95
|
Edelbrock mechanical aluminum water pump -increased cooling/reduced temps for your 429/460
|
$244.95
|
Electric water pumps-great for cooling your pro street or race Ford/Mustang. Complete kit with matching backplate , bolts, gaskets, fittings , pigtail etc .Great looks & performance. available for Windsors , 351C's & 429/460 applications.
|
$274.95
|
Discount available for above water pumps if backplate is not required!
|
please ask!
|
Manual Brake Master cylinder conversion kit-Convert your race 79-93 Mustang to a manual brake setup to save weight and space over the factory brake booster system. Includes a custom Billet Mounting plate with studs for the firewall and master, Strange 1.125 dual inline master cylinder with lines exiting towards the fender and custom adjustable brake rod. Will require making new lines from master cylinder to existing brake lines. Does not bolt up directly to factory lines.
|
$144.99 |
Manual Brake Master cylinder conversion kit-Convert your race 94- 04 SN95 Mustang to a manual brake setup to save weight and space over the factory brake booster system. Includes a custom Billet Mounting plate with studs for the firewall and master, Strange 1.125 dual inline master cylinder with lines exiting towards the fender and custom adjustable brake rod.Will require making new lines from master cylinder to existing brake lines. Does not bolt up directly to factory lines. |
$144.99 |